How To Finish Hardwood Floors After Sanding

Refinishing, sanding, staining & polyurethane for hardwood oak floors.

How to finish hardwood floors after sanding. The secret is to screen the old finish. None of it is rocket science, but it will help you to read through all the sanding pages, including first things first, working with sanders and edgers, and the sanding faq, before you begin. It would suffice to inform them during, if that's when it's discovered. To refinish a hardwood floor, the first thing you need to do is sand off the old finish.

After drying, sand and vacuum up any loose dust. By sanding your floors yourself, you could potentially save hundreds or even thousands of dollars—so long as you do it right. Area rugs can be put down in one week when the finish is fully cured. Love watching the progress of your house.

Spot test the stain or finish to see what it looks like on the floor before applying a coat. Take a shower, or at least shake yourself off well before you continue; Despite a background in art history and english literature, she’s spent 13 years sanding hardwood and teaching others to do it themselves. Sand the floor carefully making sure not to miss any areas.

First, start by sanding your raw hardwood to leave microabrasions in the wood's surface. Once the floor has been sanded, it is ready to receive a finish. The task of cleaning hardwood floors after sanding can be a time consuming one, so it's important to choose a product to do this that can quickly and effectively remove all the dust and other dirt but also for its ease of use and application. Here are some of my most important tips on how to sand hardwood floors.

So says our expert, kadee macey, owner of pete’s hardwood floors in st. Or you can flip your edge sander over, turn it on with 100. Hardwood floors rough after sanding and refinish we had some water damage and insurance is paying to sand down and refinish the hardwood floors in our kitchen, among other repairs. However, a refinished floor can bring beauty to a room like no other project.

Having dust when you sand and finish hardwood floors will have a negative effect on the overall project. The best way to achieve this is by having a very sharp scraper. Do not put an area rug down for approximately 10 days after the last poly coat went down. Next, apply a floor sealant and stain to the floors using a brush or roller.

Rather than start with the most aggressive grit you can find (the large mallet), start with something finer, like an 80 grit (the ice pick). On a sidenote, we just had our hardwood floors redone (due to a water main leak) and i have a recommendation from the pros: The finer belt will break up the finish, and after that, you can move to the rougher grit to get the floor flat and take it from there. Here are a few tips that can help make the process go by smoothly.

If possible, the first coat of finish should be applied on the same. You can save thousands of dollars by adding this. If your hardwood floors are in need of refinishing, you have two main choices: When a wood floor loses its luster, the usual solution is to sand it down to raw wood and completely refinish it.

Before your start sanding floors use the same preparations for screening, though you might want to create a double airlock (plastic on both sides of a door) to keep the dust confined. Make a mistake and it will show. If you do not clean off the floor after sanding it, you’ll end up applying the final coat of stain, varnish, or oil directly on top of this dust. You also want to rent a handheld power edge sander for sanding tight against walls and in corners and doorways.

After you finish wiping the floor, wait 10 minutes for the pine to dry. But often, that’s the wrong solution. Between each sanding, be sure to thoroughly clean and remove the dust on the floors. Renew a wood floor in half the time and at half the expense of sanding and staining.

To level off the surface, apply minwax® sanding sealer, which will take about an hour to dry. Removing dust from baseboards and windowsills will prevent accidental showers of sanding dust getting knocked onto the floor while you're coating it with finish. The time to inform a client that their floors can't handle a standard sand and finish is before undertaking the job. The original finish was semigloss (or possibly glossy finish), the refinished floors have a satin finish.

This will keep the dust from your hair and clothing out of the wet finish. Sand floors down to bare wood if there's a wax finish on top of the polyurethane, if the finish has worn through or if the floor has been stained or damaged. Hardwood floor refinishing and sanding is unforgiving work. The same thing applies when you do your fine sanding.

Then, use an electric drum sander to sand the floors several times so they're ready for the stain and wax. Doing it after the fact is unprofessional, and while it may be true, it comes across as an excuse for poor work. And competing in roller derby in her spare time. Do it yourself, or hire and pay someone else to do it for you.

The goal to scraping a corner is to remove old finish and level corner with the rest of the floor. Both units have a vacuum and dust […] To finish hardwood floors, start by removing any furniture and trim in the room and vacuuming the floors so there isn't any dust or debris on them. A floor finish will be more susceptible to scuffing and scratching until it is fully cured.

After sanding, fill in holes in the floor with wood putty or wood filler. After you do your rough sanding and rough edging, clean.